| [J1] |
Guibert, A., Bookwala, M., J. & Kim, H.A. (2024) "Level-set topology optimization of heat sinks with phase-change material", International Journal of Heat and Mass Transfer, https://doi.org/10.1016/j.ijheatmasstransfer.2024.125818 |
| [J1] |
Jauregui, C. M., Hyun, J., Neofytou, A. & Kim, H.A. (2023) "Avoiding reinventing the wheel: reusable open‑source topology optimization software", Structural and Multidisciplinary Optimization, https://doi.org/10.1007/s00158-023-03589-7 |
| [J2] |
Go, B., Kim, H.A. & Chung, H. (2023) "Investigation of thermoelastic compliances considering finite strain.", Computer Methods in Applied Mechanics and Engineering, https://doi.org/10.1016/j.cma.2023.116011 |
| [J3] |
Pozzi, K., Bonaccorsi, G., Braghin, F. & Kim, H.A. (2023) "Robust structural optimization in presence of manufacturing uncertainties through a boundary perturbation method", Structural and Multidisciplinary Optimization, https://doi.org/10.1007/s00158-023-03573-1 |
| [J4] |
Go, B., Kim, H.A. & Chung, H. (2023) "Investigation of thermoelastic compliances considering finite strain.", Computer Methods in Applied Mechanics and Engineering, https://doi.org/10.1016/j.cma.2023.116011 |
| [J5] |
Zhao, J., Kazemi, H., Kim, H.A. & Bae, J. (2022) "Effect of variations in manufacturing and material properties on the self-folding behaviors of hydrogel and elastomer bilayer structures", Soft Matter. DOI: 10.1039/D2SM01104B |
| [J6] |
Kazemi, H., Seepersad, C. C. & Kim, H. A. (2022) "Multiphysics Design Optimization via Generative Adversarial Networks", ASME Journal of Mechanical Design. DOI: 10.1115/1.4055377 |
| [J7] |
Kambampati, S., Taber, A., Kumar, G. & Kim, H.A. (2022) "A CAD-Aware Plug-and-Play Topology Optimization Framework using Moments", Structural and Multidisciplinary Optimization. DOI: 10.1007/s00158-023-03497-w |
| [J8] |
Gao, K., Doc, D. M., Chu, S., Wu, G., Kim, H.A. & Featherston, C. A. (2022) "Robust topology optimization of structures considering imprecise random field parameters", Thin-Walled Structures. DOI: 10.1016/j.tws.2022.109238 |
| [J9] |
Tran, Q. D., Kambampati, S., Kim, H. A. & Jang, G.-W. (2022) "Level set-based structural optimization with uniform wall thickness for wire-fed metal additive manufacturing", Journal of Mechanical Design (ASME-JMD). DOI: 10.1115/1.4053685 |
| [J10] |
Saha, S., Gan, Z., Cheng, L., Gao, J., Kafka, O. L., Xie, X., Li, H., Tajdari, M., Kim. H. A. & Liu, W. K. (2021) "Hierarchical Deep Learning Neural Network (HiDeNN): An artificial intelligence (AI) framework for computational science and engineering", Computer Methods in Applied Mechanics and Engineering. DOI: 10.1016/j.cma.2020.113452 |
| [J11] |
Tran Q. D., Kambampati S., Kim H. A. and Jang G-W (2022) "Level set-based structural optimization with uniform wall thickness for wire-fed metal additive manufacturing", Journal of Mechanical Design. DOI: 10.1115/1.4053685 |
| [J12] |
Chu S., Featherston C. and Kim H. A. (2021) "Design of stiffened panels for stress and buckling via topology optimization", Structural and Multidisciplinary Optimization. DOI: 10.1007/s00158-021-03062-3 |
| [J13] |
Neofytou A., Huang T-H., Kambampati S., Picelli R., Chen J-S and Kim H. A. (2021) "Level set topology optimization with nodally integrated reproducing kernel particle method", Computer Methods in Applied Mechanics and Engineering. DOI: 10.1016/j.cma.2021.114016 |
| [J14] |
Kambampati S., Gray J. S. and Kim H. A. (2021) "Level Set Topology Optimization of Load Carrying Battery Packs", International Journal of Heat and Mass Transfer. DOI: 10.1016/j.ijheatmasstransfer.2021.121570 |
| [J15] |
Hyun J. and Kim H. A. (2021) "Transient level-set topology optimization of a planar acoustic lens working with short-duration pulse", The Journal of the Acoustical Society of America. DOI: 10.1121/10.0004819 |
| [J16] |
Hyun J. and Kim H. A. (2021) "Level-set topology optimization for effective control of transient conductive heat response using eigenvalue", International Journal of Heat and Mass Transfer. DOI: 10.1016/j.ijheatmasstransfer.2021.121374 |
| [J17] |
Chu S., Townsend S., Featherston C. and Kim H. A. (2021) "Simultaneous layout and topology optimization of curved stiffened panels", AIAA Journal. DOI: 10.2514/1.J060015 |
| [J18] |
Kambampati S., Jauregui C., Museth K. and Kim H. A. (2020) "Geometry Design Using Function Representation on a Sparse Hierarchical Data Structure", Computer-Aided Design. DOI: 10.1016/j.cad.2020.102989 |
| [J19] |
Kambampati S., Chung H. and Kim H. A. (2020) "A discrete adjoint based level set topology optimization method for stress constraints", Computer Methods in Applied Mechanics and Engineering. DOI: 10.1016/j.cma.2020.113563 |
| [J20] |
Behrou R., Ghanem M. A., Macnider B. C., Verma V, Alvey R., Hong J, Emery F. A., Kim H. A. and Boechler N. (2020) "Topology optimization of nonlinear periodically microstructured materials for tailored homogenized constitutive properties", Composite Structures. DOI: 10.1016/j.compstruct.2021.113729 |
| [J21] |
Neofytou A., Picelli R., Huang T. H., Chen J. S. and Kim H. A. (2020) "Level set topology optimization for design-dependent pressure loads using the reproducing kernel particle method", Structural and Multidisciplinary Optimization. DOI: 10.1007/s00158-020-02549-9 |
| [J22] |
Kambampati S., Gray J. and Kim H. A. (2020) "Level Set Topology Optimization of Structures under Stress and Temperature Constraints", Computers and Structures Journal. DOI: 10.1016/j.compstruc.2020.106265 |
| [J23] |
Picelli R., Townsend S. and Kim H. A. (2020) "Microstructural stress optimization using the level set method", Journal of Mechanical Design (ASME-JMD), accepted, to be issued. |
| [J24] |
Kambampati S., Townsend S. and Kim H. A. (2020) "Coupled Aerostructural Topology Optimization of Aircraft Wing Boxes using a Level Set Method", AIAA Journal, accepted, to be issued. |
| [J25] |
Kambampati S. and Kim H. A. (2020) "Level set topology optimization of cooling channels using the Darcy flow model", Structural and Multidisciplinary Optimization, to be issued. DOI: 10.1007/s00158-019-02482-6 |
| [J26] |
Kambampati S., Jauregui C., Museth K. and Kim H. A. (2020) "Large-scale level set topology optimization for elasticity and heat conduction", Structural and Multidisciplinary Optimization, to be issued. DOI: 10.1007/s00158-019-02440-2 |
| [J27] |
Li L., Du Z. and Kim H. A. (2020) "Design of architected materials for thermoelastic macrostructures using level set method", JOM, The Journal of The Minerals, Metals and Materials Society (TMS), to be issued. DOI: 10.1007/s11837-020-04046-2 |
| [J28] |
Chung H., Amir O. and Kim H.A. (2019) "Level-set topology optimization considering nonlinear thermoelasticity", Preprint-arXiv : https://arxiv.org/abs/1909.11185 |
| [J29] |
Townsend S. and Kim H.A. (2019) "A level set topology optimization method for the buckling of shell structures", Structural and Multidisciplinary Optimization, to be issued. DOI: 10.1007/s00158-019-02374-9 |
| [J30] |
Townsend S., Picelli R., Grigg S., Featherston C. and Kim H.A. (2019) "Topology optimization of vibrational piezoelectric energy harvesters for structural health monitoring applications", Journal of Intelligent Material Systems and Structures, accepted, to be issued. |
| [J31] |
Picelli R., Neofytou A. and Kim H.A. (2019) "Topology optimization for design-dependent hydrostatic pressure loading via the level set method", Structural and Multidisciplinary Optimization, to be issued. DOI: 10.1007/s00158-019-02339-y |
| [J32] |
Zhou X.Y., Du Z. and Kim H.A. (2019) "A level-set shape metamorphosis with mechanical constraints for geometrically graded microstructures in multiscale topology optimization", Structural and Multidisciplinary Optimization, 60(1): 1-16. DOI: 10.1007/s00158-019-02293-9 |
| [J33] |
Jang G.W., Kambampati S., Chung H. and Kim H.A. (2019) "Configuration optimization for thin structures using level set method", Structural and Multidisciplinary Optimization, 59(6): 1881-1893. DOI: 10.1007/s00158-019-02246-2 |
| [J34] |
Chung H., Hwang J.T., Gray J.S. and Kim H.A. (2019) "Topology optimization in OpenMDAO", Structural and Multidisciplinary Optimization, 59(4): 1385-1400. DOI: 10.1007/s00158-019-02209-7 |
| [J35] |
Du Z., Zhou X.Y., Picelli R. and Kim H.A. (2018) "Connecting microstructures for multiscale topology optimization with connectivity index constraints", Journal of Mechanical Design, 140(11): 111417. DOI: 10.1115/1.4041176 |
| [J36] |
Picelli R., Townsend S. and Kim H.A. (2018) "Stress and strain control via level set topology optimization", Structural and Multidisciplinary Optimization, 58(5): 2037-2051. DOI: 10.1007/s00158-018-2018-z |
| [J37] |
Townsend S., Stanford B., Picelli R. and Kim H.A. (2018) "Structural optimization of plate-like aircraft wings under flutter & divergence constraints", AIAA Journal, 56(8): 3307-3319. DOI: 10.2514/1.J056748 |
| [J38] |
Picelli R., Townsend S., Brampton C., Norato J. and Kim H.A. (2017) "Stress-based shape and topology optimization with the level set method", Computer Methods in Applied Mechanics and Engineering, 329: 1-23. DOI: 10.1016/j.cma.2017.09.001 |
| [J39] |
Hedges L.O., Kim H.A. and Jack R.L. (2017) "Stochastic level-set method for shape optimisation", Journal of Computational Physics, 348: 82-107. DOI: 10.1016/j.jcp.2017.07.010 |
| [J40] |
Sivapuram R., Dunning P.D. and Kim H.A. (2016) "Simultaneous material and structural optimization by multiscale topology optimization", Structural and multidisciplinary optimization, 54(5), 1267-1281, Special Issue in Memory of Prof. George Rozvany (Invited). DOI: 10.1007/s00158-016-1519-x |
| [J41] |
Dunning P.D., Ovtchinnikov E., Scott J. and Kim H.A. (2016) "Level-set topology optimization with many linear buckling constraints using an efficient and robust eigensolver", International Journal for Numerical Methods and Engineering, 107(12), 1029-1053. DOI: 10.1002/nme.5203 |
| [J42] |
Harris P, Bowen CR, Kim HA, Litak G, (2016) “Dynamics of a vibrational energy harvester with a bistable beam: Voltage response identification multiscale entropy and 0-1 test”, European Physica Journal – Plus, 131 (4), ARTN 109. |
| [J43] |
Syta A, Bowen CR, Kim HA, Rysak A, Litak G (2016) “Responses of bistable piezoelectric-composite energy harvester by means of recurrences,” Mechanical Systems and Signal Processing 76-77, 823-32. |
| [J44] |
Duro J, Padget JA, Bowen CR, Kim HA, Nassehi A (2016) "Multi-sensor data Fusion Framework for CNC Machining Monitoring", Mechanical Systems and Signal Processing 66, 505-520. |
| [J45] |
Brampton CJ, Wu KC, Kim HA (2015) "New optimization method for tow steered fiber composites using the level set method," Structural and Multidisciplinary Optimization, 52(3), 493-505, DOI: 10.1007/s00158-015-1256-6. |
| [J46] |
Guyer RA, Kim HA (2015) "Theoretical model for fluid-solid coupling in porous materials", Physical Review: E, 91, 042406, DOI: 10.1103/PhysRevE.91.042406. |
| [J47] |
Dunning PD, Kim HA (2015) "Simultaneous optimisation of structural topology and material grading using a level-set method," Special issue on 3D Printing (invited), Materials Science and Technology, 31(8), 884-894. |
| [J48] |
Syta A, Bowen CR, Kim HA, Rysak A, Litak G (2015) "Experimental analysis of the dynamical response of energy harvesting devices based on bistable laminated plates," Meccanica, DOI 10.1007/s11012-015-0140-1. |
| [J49] |
Harris P, Skinner W, Bowen CR and Kim HA (2015) "Manufacture and characterisation of piezoelectric broadband energy harvesters based on asymmetric bistable laminates," Ferroelectrics, 480, 1–10. |
| [J50] |
Dunning PD, Stanford BK, Kim HA (2015) "Coupled aerostructural topology optimization using a level set method for 3D aircraft wings", Structural and Multidisciplinary Optimization, 51(5), 1111-1132, DOI: 10.1007/s00158-014-1200-1. |
| [J51] |
Dunning PD, Kim HA (2015) "Introducing the sequential linear programming level-set method for topology optimization," Structural and Multidisciplinary Optimization, 51(3), 631-643, DOI: 10.1007/s00158-014-1174-z. |
| [J52] |
Dunning PD, Stanford BK, Kim HA, Jutte CV (2014) "Aeroelastic tailoring of a plate wing with functionally graded materials," Journal of Fluids and Structures, 51, 292-312, DOI: 10.1016/j.jfluidstructs.2014.09.008 |
| [J53] |
Harris P, Bowen CR, Kim HA (2014) "Manufacture and characterisation of piezoelectric broadband energy harvesters based on asymmetric bistable laminates," Journal of Multifunctional Composites, in press. |
| [J54] |
Borowiec M, Rysak A, Betts DN, Bowen CR, Kim HA, Litak G (2014) "Complex response of a bistable laminated plate: Multiscale entropy analysis", European Physical Journal - Plus, in press. |
| [J55] |
Song YZ, Bowen CR, Kim HA, Nassehi A, Padget, JA (2014) "Virtual visual sensors and their application in structural health monitoring," Structural Health Monitoring, 13(3), 251-264, DOI: 10.1177/1475921714522841. |
| [J56] |
Song YZ, Bowen CR, Kim HA, Nassehi A, Padget JA, Gathercole N, Dent A (2014) "Non-invasive damage detection in beams using novel marker extraction and wavelets," Mechanical Systems and Signal Processing, 49(1-2), 13-23, DOI: 10.1016/j.ymssp.2013.12.011 |
| [J57] |
Bowen CR, Kim HA, Weaver PM, Dunn S (2014) "Piezoelectric and ferroelectric materials and structures for energy harvesting applications," Energy & Environmental Science, Royal Society of Chemistry, 7, 25-44, DOI: 10.1039/C3EE42454E. |
| [J58] |
Duan K, Padget JA, Kim HA (2014) "A light-weight framework for bridge-building from desktop to cloud," 2014 Service-Orientated Computing, CCSA, CSB, PASCEB, SWESE, WESOA, and PhD Symposium, Berlin, Germany, December 2-5, 2013, Revised Selected Papers, Lomuscio, A., Nepal, S., Patrizi, F., Benatallah, B. & Brandic, I. (eds.). Vol. 8377, pp. 308-323 16 p. (Lecture Notes in Computer Science; vol. 8377) |
| [J59] |
Bowen CR, Kim HA, Salo AIT (2013) "Piezoelectric Composites Based on Bistable Composites," Procedia Engineering, 10.1007/s00542-013-2012-8. |
| [J60] |
Bowen CR, Kim HA, Betts DN, Topolov VY (2013) "2–2 composites based on [011]-poled relaxor-ferroelectric single crystals: analysis of the piezoelectric anisotropy and squared figures of merit for energy harvesting applications", Journal of Microsystems, accepted. |
| [J61] |
Bowen CR, Watson M, Betts DN, Harris P, Bertin M, Kim HA (2013) "Piezoelectric fibres integrated into structural composites," Ferroelectrics, 466(1), 14-20. |
| [J62] |
Dunning, PD, Kim HA (2013) "Robust topology optimization: Minimization of expected and variance of compliance," Special Section on Past, Present and Future of Multidisciplinary Design Optimisation (invited), AIAA Journal, 51(11), 2656-2664. doi: 10.2514/1.J052183. |
| [J63] |
Betts DN, Bowen CR, Kim HA, Gathercole N, Clarke CT, Inman DJ (2013) "Nonlinear dynamics of a bistable piezoelectric-composite energy harvester for broadband application," Special issue on Dynamics of Composite Nonlinear Systems and Materials for Engineering Applications and Energy Harvesting, European Physical Journal, 222 1553-1562. DOI: 10.1140/epjst/e2013-01944-6 |
| [J64] |
Brampton CJ, Betts DN, Bowen CR, Kim HA, (2013) "Sensitivity of bistable laminates to uncertainties in material properties, geometry and environmental conditions," Composite Structures, 102, 276-286. |
| [J65] |
Dunning PD, Kim HA (2013) "A new method for creating holes in level-set function based topology optimisation", International Journal for Numerical Methods in Engineering, 93, 118-134, DOI: 10.1002/nme.4384. |
| [J66] |
Browne PA, Budd CJ, Gould NIM, Kim HA, Scott JA (2012) "A fast method for binary programming using first order derivatives, with application to topology optimization with buckling constraints" International Journal for Numerical Methods in Engineering, 92, 1026-1043, DOI: 10.1002/nme.4367. |
| [J67] |
Betts DN, Kim HA, Bowen CR, Inman DJ (2012) "Optimal Configurations of Bistable Piezo-Composites for Energy Harvesting", Applied Physics Letters, 100, 114104, DOI: 10.1063/1.3693523. |
| [J68] |
Betts DN, Kim HA, Bowen CR (2012) "Preliminary Study of Optimum Piezoelectric Cross-Ply Composites for Energy Harvesting", Special Issue on Smart Composite Materials (invited), Smart Materials Research, 2012, 621364, doi:10.1155/2012/621364. |
| [J69] |
Bowen CR, Betts DN, Giddings PF, Salo AIT, Kim HA (2011) "A study of bistable laminates of generic lay-up for adaptive structures", Strain, 48, 235-240 DOI: 10.1111/j.1475-1305.2011.00817.x. |
| [J70] |
Betts DN, Kim HA, Bowen CR (2011) "Optimization of Stiffness Characteristics for the Design of Bistable Composite Laminates", AIAA Journal, 50(10), 2211-2218. |
| [J71] |
Betts DN, Kim HA, Bowen CR (2011), "Modeling and Optimization of Bistable Composite Laminates for Piezoelectric Actuation", Journal of Intelligent Material Systems and Structures, 22 (18), 2186 - 2196. |
| [J72] |
Guyer, R. A., Kim, H. A., Derome, D., Carmeliet, J. & TenCate, J. (2011) "Hysteresis in modeling of poroelastic systems: Quasistatic equilibrium", Physical Review E, 83, 061408, LA-UR 10-7816. |
| [J73] |
Giddings PF, Bowen CR, Kim HA, Salo AIT, Betts D (2011) "Modeling and characterization of piezoelectrically actuated bistable composites", (Invited), IEEE Transactions on Ultrasonic, Ferroelectric and Frequency Control Society, 58(9), 1737-1750 |
| [J74] |
Dunning P.D., Kim H.A. (2011) "Investigation and improvement of sensitivity computation using the area-fraction weighted fixed grid FEM and structural optimization", Finite Elements in Analysis and Design, 47(8): 933-941. DOI: 10.1016/j.finel.2011.03.006 |
| [J75] |
Dunning P.D., Kim H.A., Mullineux G. (2011) "Introducing Loading Uncertainty in Topology Optimization", AIAA Journal, 49(4): 760-768. DOI: 10.2514/1.J050670 |
| [J76] |
Giddings PF, Kim HA, Salo AIT, Bowen CR (2011) "Modelling of piezoelectrically actuated bistable composites", Materials Letters, 65, 1261-1263. |
| [J77] |
Kim HA, Betts DN, Salo AIT, Bowen CR (2010) "Shape Memory Alloy–Piezoelectric Active Structures for Reversible Actuation of Bistable Composites", AIAA Journal, 48(6), 1265-1268. |
| [J78] |
Betts DN, Salo AIT, Bowen CR, Kim HA (2010) "Characterisation and modelling of the cured shapes of arbitrary layup bistable composite laminates", Composite Structures, 92(7), 1694-1700. |
| [J79] |
Giddings PF, Bowen CR, Salo AIT, Kim HA, Ive A (2010) "Bistable composite laminates: effects of Laminate composition on cured-shape and response to thermal load", Composite Structures, 92(9), 2220–2225. |
| [J80] |
Crick T, Dunning P, Kim HA, Padget PA (2009) "Engineering design optimisation using services and workflows", Royal Society Philosophical Transactions A, 367, 2741-2751 |
| [J81] |
Giddings PF, Bowen CR, Kim HA (2009) "Characterisation of force-deflection behaviour of piezoelectrically actuated bistable composite laminate under two-axis constraint", Advances in Science and Technology, 56, 380-385 |
| [J82] |
Williams PA, Kim HA, Butler R (2008) "Bimodal buckling of optimised truss-lattice shear panels", AIAA Journal, 46(8), 1937-1962 |
| [J83] |
Liu W, Butler R, Kim HA (2008) "Optimization of composite stiffened panels subject to compression and lateral pressure using a bi-level approach", Structural and Multidisciplinary Optimization, 36(3), 235-245 |
| [J84] |
Williams PA, Butler R, Kim HA, Hunt GW (2008) "Complementary post-buckling analyses of truss-lattice shear panels", Journal of Mechanics of Materials and Structures, 3(5), 995-1009 |
| [J85] |
Kim HA, Featherston CA, Ussel J, Williams PA (2008) "Introducing a discrete modelling technique for buckling of continuous panels under combined loading", Structural and Multidisciplinary Optimization, 36(1), 3-13 |
| [J86] |
Kim HA, Clement PJ, Cunningham JL (2008) "Investigation of cancellous bone architecture using structural optimisation", Journal of Biomechanics, 41(3), 629-635 |
| [J87] |
Giddings P, Bowen CR, Butler R, Kim HA (2008) "Characterisation of actuation properties of piezoelectric bi-stable carbon-fibre", Composites: Part A, 39, 697-703 |
| [J88] |
Edwards CS, Kim HA, Budd CJ (2007) "An evaluative study of ESO and SIMP for optimising a cantilever tie-beam", Structural and Multidisciplinary Optimization (by invitation). 34(5), 403-414 |
| [J89] |
Bowen CR, Salo AIT, Butler R, Chang E, Kim HA (2007) "Bi-stable composites with piezoelectric actuators for shape change", Key Engineering Materials. 334-335, 1109-1112 |
| [J90] |
Bowen CR, Butler R, Jervis R, Kim HA, Salo AIT (2007) "Morphing and shape control using unsymmetrical composites," Journal of Intelligent Material Systems and Structures, 18, 89-98 |
| [J91] |
Kim H, Kirby BPD (2006) "Investigation of External Airbags for Rotorcraft Crashworthiness," AIAA Journal of Aircraft. 43(3), 809-816 |
| [J92] |
Kim H, Querin OM, Steven G P, Xie YM (2002) "Improving efficiency of evolutionary structural optimisation by implementing fixed grid mesh," Structural and Multidisciplinary Optimization. 24(6), 441-448 |
| [J93] |
Kim H, Querin OM, Steven GP, Xie YM (2002) "Determination of an Optimal Topology with a Predefined Number of Cavities," AIAA Journal, 40(4), 739-744 |
| [J94] |
Kim H, Querin OM, Steven GP (2002) "On development of structural optimisation and its relevance in engineering design," Design Studies, 23(1), 85-102 |
| [J95] |
Kim H, García MJ, Querin OM, Steven GP, Xie YM (2000) "Introducing fixed grid in evolutionary structural optimisation," Engineering Computations, 17(4), 427-439. |
| [J96] |
Kim H, Querin OM, Steven GP, Xie YM (2000) "A method for varying the number of cavities in an optimised topology using evolutionary structural optimisation," Structural and Multidisciplinary Optimization, 19(2), 140-147 |